Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Clutch not releasing


Recommended Posts

Do I was driving down the highway yesterday, all of a sudden my clutch pedal was stuck to the floor, clutch engaged, truck in gear. Pulled over, pop the hood, hear a long slow hiss if some sort of pressure releasing. Clutch fluid level is slightly over filled so it's not actual leading any fluid. With the truck pulled over and turned off I rapidly pumped the pedal and felt it build up pressure again, was able to get out to shift normally for a little bit until it progressively loses pressure and I have to pump the pedal again.

 

Long story short, my best guess is master cylinder is shot but want some second opinions, especially from anyone who has ever had similar problems.

 

Opinions?

Link to comment
Share on other sites

Sounds like bad master cylinder. Clutch disk wouldn't have an affect like this. Pressure in the system is what forces the pedal back to rest. If there's a leak or no pressure being built by the master cylinder, the pedal won't come back up.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...