Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Rear Ball Joints need replacing.


Paddymcg
 Share

Recommended Posts

Hi folks, this is my first post on the site. I have a 2006 SE pathy, no mods except to the interior, lots of straps and wedding for holding climbing gear and kayaking gear. I was doing the road worthiness test in ireland and they have told me that all of my rear bushings have too much play in them. So I went to my local garage and asked him for a price on the replacement of these bushings. He tells me that they cannot be replaced on their own, the wishbones have to be dome with them as they are one complete unit, is this true? The price that he was given for each ball joint and whishbone was 420 plus vat, and there are 4 to be done!

I guess I'm asking if what I have described is actually true or cal these ball joints be bought seperately?

 

Thanks folks,

 

Paddy

Link to comment
Share on other sites

You can get the whole link and bushing assembly together, or you can get new bushings. The problem is that the bushings have to be pressed in, which is apparently a PITA. You can also get aftermarket poly bushings, which go in more easily, but you still have to tear out the old ones. Buying whole links is the easy way to do it. More info >> :clickdalink:

Link to comment
Share on other sites

You can get the whole link and bushing assembly together, or you can get new bushings. The problem is that the bushings have to be pressed in, which is apparently a PITA. You can also get aftermarket poly bushings, which go in more easily, but you still have to tear out the old ones. Buying whole links is the easy way to do it. More info >> :clickdalink:

 

2006 is R51 in the US at least, which is IRS. it doesn't have a solid axle with bushings. Honestly it sounds right to me - probably one piece will chime in here in a bit...

Link to comment
Share on other sites

I dont believe it, that part that you linked to http://www.courtesyparts.com/55501-arm-assy-rear-suspensionrh-pathfinder-r51-2005-2010-p-568621.html Its 400 euro here in ireland for one of them!

 

Thanks for the help folks, I sourced some second hand parts so at least they are not full price.

 

Paddy

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...