Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Fixed my rear defrost

RF600

By RF600,
in The Garage

 Share

Recommended Posts

RF600 NPORA Old-Timer

RF600

Posted
Posted

The rear defrost on my rig has not worked since I bought it. Today I dove into it. I checked this and that. Pulled relays, checked the grid, ran a different power wire. Still nothing.

 

After all that, it was narrowed down to one side of the wires connecting to the grid. What it ended up being was just a ground that had corroded. I cut a little bit of wire off that was bad. Put a new eyelet on. The screw holding the ground on didn't tighted up properly, so I put a new screw in. It now works.

 

The ground is on the passengers side. Where the ground mounted was painted. The only connection was the hole. I scraped the paint off around where the eyelet would sit. It should last for quite a while now.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...