linewar Posted January 31, 2013 Share Posted January 31, 2013 I'm not sure about cross-application to other Jeeps, since the KJ is the only Jeep I ever owned. I did a little more refreshing of my memory, and looked at the Boulder Bars link I posted on page 1. The Frankenlift for the gasser KJ uses OME 927's in the front for H/D, and the Frankenlift for the CRD uses OME 790's in the front. Both use 948's in the rear. Not sure about the 928, since it is not listed. Link to comment Share on other sites More sharing options...
shoesandsocks Posted January 31, 2013 Author Share Posted January 31, 2013 i wish i could get a spec shet on the differences between the 928 and the 927 the 928 just apear to be a stiffer 927 from what i read only recomended for rigs with alot of front weight in the liberty crowd to bad my ironman springs came yesterday this seems interesting. Link to comment Share on other sites More sharing options...
Iceman2989 Posted January 31, 2013 Share Posted January 31, 2013 What are the measurements of your ironman springs? Link to comment Share on other sites More sharing options...
shoesandsocks Posted February 1, 2013 Author Share Posted February 1, 2013 ill get those measurements for ya as soon as i get home bud Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now