Rayy Posted September 25, 2012 Share Posted September 25, 2012 Is it common for the 97 pathys to have light in the heater? if it is, what/where do i have to do to get light if i have to just change the bulb, what socket is it? Or do i have to fix that myself? Link to comment Share on other sites More sharing options...
Towncivilian Posted September 25, 2012 Share Posted September 25, 2012 Are you talking about the manual HVAC controls? If so, yes, those have two #74 bulbs. The two buttons (A/C and recirculation) use 12v microbulbs. Link to comment Share on other sites More sharing options...
sroeser01 Posted October 13, 2012 Share Posted October 13, 2012 I've taken my whole console apart for aftermarket sterile and cb radio install and don't know how to get to these bulbs? Any help ? Link to comment Share on other sites More sharing options...
Towncivilian Posted October 13, 2012 Share Posted October 13, 2012 See this article on radio removal. After you've done that, remove the four Phillips screws holding in the manual HVAC unit, push it toward the front of the car slightly, down and out so you can access the bulb twist bases. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now