SteeevO Posted July 20, 2012 Share Posted July 20, 2012 Pathfinder construction is underway, the D44 is coming out and this wheel / tire combo will be ran when it all goes back together wth the diamond axle and the RR SAS Kit Link to comment Share on other sites More sharing options...
nunya Posted July 20, 2012 Share Posted July 20, 2012 Digging the danger orange lock rings (I probably would have personally went a little more feminine ) like the clean ruggedrocks.com decal job down the bottom of the truck too, though I always dug the old doitontherocks.com one Link to comment Share on other sites More sharing options...
PaMountianbiker Posted July 20, 2012 Share Posted July 20, 2012 What kind of transformation ??? Link to comment Share on other sites More sharing options...
SteeevO Posted July 21, 2012 Author Share Posted July 21, 2012 transformation? Link to comment Share on other sites More sharing options...
trexterra Posted July 21, 2012 Share Posted July 21, 2012 my HB needs your sas kit steeevo, but I guess if you take your time then I have a reason to save money for it =) Link to comment Share on other sites More sharing options...
SteeevO Posted July 22, 2012 Author Share Posted July 22, 2012 I'm not rushing the build at all. (Although these tires make we want to go wheel right now!) It's going to take some time to build the new brackets and transmission cross member but it should come together really nice. I'm super excited about it. Link to comment Share on other sites More sharing options...
trexterra Posted July 22, 2012 Share Posted July 22, 2012 Yeah I thought I was going to get more opportunities to get out and wheel. But some day I'll get more time. Sent from my Galaxy Nexus using Tapatalk 2 Link to comment Share on other sites More sharing options...
Tungsten Posted July 26, 2012 Share Posted July 26, 2012 I bet that took quite a while to torque all those bolts down. Link to comment Share on other sites More sharing options...
SteeevO Posted July 28, 2012 Author Share Posted July 28, 2012 lol yeah... you dont want to know.. Link to comment Share on other sites More sharing options...
trexterra Posted July 29, 2012 Share Posted July 29, 2012 i'm surprised you didn't use a drill to snug em up first Link to comment Share on other sites More sharing options...
SteeevO Posted July 30, 2012 Author Share Posted July 30, 2012 it's better to do it by hand you so can more or less get them close to the same torque before putting the torque wrench on them. Link to comment Share on other sites More sharing options...
PaMountianbiker Posted July 30, 2012 Share Posted July 30, 2012 So.... If we would buy a set up like that from you it would be together already; ready to bolt on truck ??? Link to comment Share on other sites More sharing options...
SteeevO Posted July 30, 2012 Author Share Posted July 30, 2012 that can be arranged. just give me a call. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now