hillbillybob Posted February 17, 2012 Share Posted February 17, 2012 (edited) Ever since I've had my pathy only the very bottom line of the rear defroster has worked. I finally got tired on not being able to see out the back and looked at it a little closer and I don't see any visible cuts, rub marks, or burnt out spots in the rest of the lines, I know its getting power because the one works but I don't understand why the rest don't work, anyone have burnt out/ lines that don't work? Can I check to see if its getting proper power? Check voltage? Edited February 17, 2012 by hillbillybob Link to comment Share on other sites More sharing options...
1994SEV6 Posted February 17, 2012 Share Posted February 17, 2012 http://www.nissanpathfinders.net/forum/index.php?showtopic=31579&st=20 There's a prize on page 2. Link to comment Share on other sites More sharing options...
sewebster Posted February 17, 2012 Share Posted February 17, 2012 Use a voltmeter (with the defroster on). Put one lead on one of the supply lines on the side, then slowly move the other lead down the defroster line. Where it switches from 12V to 0V, that's where the break is. Link to comment Share on other sites More sharing options...
silverton Posted February 17, 2012 Share Posted February 17, 2012 The nicks in my lines were very difficult to see. Run your finger over them and you should be able to feel the pits. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now