new4x4r Posted January 25, 2012 Share Posted January 25, 2012 yeah it will be no problem to swap in the metal. Also, you can use 1/4" rubber hose to line the exposed metal on the fender hole/take up the gap. Just slice it down the side and push it on. Link to comment Share on other sites More sharing options...
PaMountianbiker Posted January 25, 2012 Author Share Posted January 25, 2012 yeah it will be no problem to swap in the metal. Also, you can use 1/4" rubber hose to line the exposed metal on the fender hole/take up the gap. Just slice it down the side and push it on. I used door edge guard Link to comment Share on other sites More sharing options...
new4x4r Posted January 26, 2012 Share Posted January 26, 2012 oh nice! looks really good! Link to comment Share on other sites More sharing options...
PaMountianbiker Posted January 26, 2012 Author Share Posted January 26, 2012 Trying it out a little 1 Link to comment Share on other sites More sharing options...
new4x4r Posted February 5, 2012 Share Posted February 5, 2012 My snorkel is almost on, painted and plumbed up!!!! Thanks for the motivation brudder!!! One question though, where did you get the door edging? My rubber hose trick works, but looks like a bag of d*cks :-) Link to comment Share on other sites More sharing options...
PaMountianbiker Posted February 5, 2012 Author Share Posted February 5, 2012 My snorkel is almost on, painted and plumbed up!!!! Thanks for the motivation brudder!!! One question though, where did you get the door edging? My rubber hose trick works, but looks like a bag of d*cks :-) NAPA can't wait to see it !!! Link to comment Share on other sites More sharing options...
Heloflyboy Posted February 6, 2012 Share Posted February 6, 2012 I agree with Dowser on gap. It looks good . For everyone that does not know the computer is under front seats and it will short out and stop you long before you have to hold your breath. haha I found that out in a bad way. Link to comment Share on other sites More sharing options...
OfftourRoadie96 Posted February 9, 2012 Share Posted February 9, 2012 Found this on another site (Yota, sorry). But thought this guy did a pretty clean job! Yota Snorkel Build Link to comment Share on other sites More sharing options...
PaMountianbiker Posted February 9, 2012 Author Share Posted February 9, 2012 (edited) Looks very nice but I would be concerned that that would catch a limb while trail riding. Edited February 9, 2012 by PaMountianbiker Link to comment Share on other sites More sharing options...
nunya Posted February 9, 2012 Share Posted February 9, 2012 My rubber hose trick works, but looks like a bag of d*cks :-) can't wait to see it !!! and people think I'M the one 1 Link to comment Share on other sites More sharing options...
PaMountianbiker Posted February 9, 2012 Author Share Posted February 9, 2012 and people think I'M the one Seems like a twist on words to me Link to comment Share on other sites More sharing options...
nunya Posted February 9, 2012 Share Posted February 9, 2012 Just selective hearing (reading?) Link to comment Share on other sites More sharing options...
OfftourRoadie96 Posted February 9, 2012 Share Posted February 9, 2012 Looks very nice but I would be concerned that that would catch a limb while trail riding. Ahhh, I see your point! Makes sense, more sturdy connected to some fender. Link to comment Share on other sites More sharing options...
new4x4r Posted February 9, 2012 Share Posted February 9, 2012 I'll have mine in by the weekend. Friggen bed liner I used to cover the pipe took the primer off. So I had to start again. But its all fabbed up and ready to work. Link to comment Share on other sites More sharing options...
PaMountianbiker Posted February 9, 2012 Author Share Posted February 9, 2012 Mine is more tight to body and goes up under my roof rack so seems more protected. No protruding parts to grab limbs out in the woods . Our trails around here are tight. Also my getto ABS pipe is very easy to fix . Link to comment Share on other sites More sharing options...
PaMountianbiker Posted February 9, 2012 Author Share Posted February 9, 2012 (edited) I'll have mine in by the weekend. Friggen bed liner I used to cover the pipe took the primer off. So I had to start again. But its all fabbed up and ready to work. LOL!!!!!!! Edited February 9, 2012 by PaMountianbiker Link to comment Share on other sites More sharing options...
new4x4r Posted February 11, 2012 Share Posted February 11, 2012 Here ya go SMARTA$$!!!! Link to comment Share on other sites More sharing options...
PaMountianbiker Posted February 11, 2012 Author Share Posted February 11, 2012 Looks effin awesome !!!!! do you have an ARB type top for it ? I want to see some pics of the engine so we can see how you did that ?? Link to comment Share on other sites More sharing options...
new4x4r Posted February 11, 2012 Share Posted February 11, 2012 Here it is... It works in conjunction with the airbox mod I did awhile back (after the hydrolock). I just used Marine exhaust tube and a one way flapper valve to drain off any water that gets in there automatically. I hope this helps my fuel economy, it was sucking hot air with the airbox mod (better hot air then water). I don't have a top for it yet. I'm working on a couple right now. I'm also considering a Pre-cleaner. I like the Aussie, safari look hahaha Link to comment Share on other sites More sharing options...
PaMountianbiker Posted February 12, 2012 Author Share Posted February 12, 2012 Looks nice I was wondering how you came out that far up the fender ?? I already had a dent where mine comes through and I don't have a stock airbox Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now