Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Titan Rims on Pathfinder?


Recommended Posts

The center of the hub wont fit. You have to have it bored out to clear the hub. I have seen this done either at a machine shop or I had seen a guy to it with a router and a special bit. I had a 91 hardbody and put the stock 18's from a QX56(different wheel than the Titan). I did a bunch of research on how to make them fit. It is not a bolt on swap. If you did bore them out, yeah, you might rub. Not many have done it so you might be a guinea pig!

 

 

Here is some info(note- this is not 4x4 friendly)..........

 

http://infamousnissan.com/forum/showthread.php?t=11646

Edited by 5523Pathfinder
Link to comment
Share on other sites

I remember a while back a guy posted a picture of his R50 with 18" titan wheels. I don't remember the lift he had but he did have to bore the centers out.

I had 18s on my titan when I bought it and changed them out for a set of factory 20s. There aren't many options for tire sizes in 18" and they were more expensive then the same hight tire for a 20" rim. You will probably be better off with 15 or 16" wheels.

James

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...