10 inch wide rims stock height?

[chatch82]

Just picked up a set of black steel wheels with some 31s on them from a buddy. The rims are 10 inches wide but he said they should fit without any issue at stock height. What does everyone think?

[MY1PATH]

They will fit but it is a lot of stress on the IFS.

I believe they need to be 4" backspace too.

[chatch82]

ok thanks man

[chatch82]

thanks man

[nunya]

Removed the double topic for ya there

 

What kinda driving you plan to do with them? I don't know how well a 10" wide wheel is gonna tuckat either end or if your suspension is sagged out it might make it closer.

[Slick]

if your front end isn't saggy, and the BS is right, you should be ok. I run 15x10's but i have a lot of lift. try em before you buy em.

[chatch82]

if your front end isn't saggy, and the BS is right, you should be ok. I run 15x10's but i have a lot of lift. try em before you buy em.

 

 

 

The wheels and tires were given to me....I figure if they dont fit I will sell them or throw in a body lift. The front end isnt sagging at all. I was worried about the rim hitting the rear shock more than anything!!!