1991terrano Posted January 25, 2011 Share Posted January 25, 2011 do the 90-95 pathys have bigger front brake rotors then the 86-90, i bought a 87 pathy for parts for my 91 terrano went to change the rotors over and the terrano ones were 10mm bigger in diameter and also wider seems like the car is pretty much useless for parts! Link to comment Share on other sites More sharing options...
nunya Posted January 25, 2011 Share Posted January 25, 2011 Rockauto shows a part number for the front rotors on both an 87 and a 91 as a Bendix 1447... Your 87 parts truck a 4 cylinder truck possibly and the 91 a 3.0? Link to comment Share on other sites More sharing options...
1991terrano Posted January 25, 2011 Author Share Posted January 25, 2011 the 91 is a 2.7 turbo diesel, could you put a link up for this site please Link to comment Share on other sites More sharing options...
ahardb0dy Posted January 25, 2011 Share Posted January 25, 2011 (edited) www.rockauto.com I just looked up the rotor for a 91 Terrano with the 2.7 turbo diesel engine and it says the rotor is 277mm, the 87 pathfinder 3.0 V6 is saying the rotor is 10.895" same for the 4 cylinder. 277 millimeter = 10.905 inch Edited January 25, 2011 by ahardb0dy Link to comment Share on other sites More sharing options...
1991terrano Posted January 25, 2011 Author Share Posted January 25, 2011 (edited) woahhh is that the diameter? thats more then 100mm bigger then either of the 2 i pulled off Edited January 25, 2011 by 1991terrano Link to comment Share on other sites More sharing options...
OldSlowReliable Posted January 25, 2011 Share Posted January 25, 2011 woahhh is that the diameter? thats more then 100mm bigger then either of the 2 i pulled off So you're saying the rotors you pulled off were less than 177mm? So you pulled off a 7" rotor? Someone isn't measuring something right... Link to comment Share on other sites More sharing options...
ahardb0dy Posted January 25, 2011 Share Posted January 25, 2011 the numbers I wrote are the diameter taken from the rockauto site Link to comment Share on other sites More sharing options...
1991terrano Posted February 4, 2011 Author Share Posted February 4, 2011 So you're saying the rotors you pulled off were less than 177mm? So you pulled off a 7" rotor? Someone isn't measuring something right... yeeah lol i messed it up was 2 busy with the differences between the 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now