2001 LE digital clock

[LightPath09]

Hello,

 

 

Im wondering if there is a fuse or maybe someone has had this problem of the clock on being lit?

My Pathfinder is started but the clock is not on.

 

Thank you for your time

[ahardb0dy]

sounds stupid, but check the dimmer switch for the dash lights

[LightPath09]

Ive tried that, the clock just will not light up. I also checked all my small fuses too

[ahardb0dy]

found this in the FSM check out link:

 

http://www.nicoclub.com/FSM/pathfinder/2001.5_Pathfinder/el.pdf

 

sorry didn't come up to the exact page so enter 576 into the page window on top

Edited January 6, 2011 by ahardb0dy

[Towncivilian]

If fuses and wiring checks out OK, then you may need to disassemble the clock and look for potential bad solder joints and resolder them. I remember some forum post either here or on NICOclub that one specific resistor had a bad solder job for several members, so that may be your issue. Either that or hit up a junkyard.

[LightPath09]

Thanks for the pdf ill try some things

[ahardb0dy]

looks like there is only 2 fuses that control the clock. I did a search on Google and found a lot of people complaining about the clocks not working, if the clock can be easily removed, myself I would take it apart and check the circuit board as Towncivilian suggested.

[LightPath09]

Thanks again for your time

[ahardb0dy]

No problem, that's why we are here, good luck, let us know what you find.

 

Welcome to the site, by the way !!

Edited January 6, 2011 by ahardb0dy

[RedRider3141]

Any updates Light Path? I have the same issue and I was thinking that the joker who installed the aftermarket stereo might have pulled out a wire or something.

[RedRider3141]

Never mind I fixed it: http://npora.ipbhost...showtopic=29248