Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Interior Bulbs

alsalsa

By alsalsa,
in 90-95 WD21 Pathfinders

 Share

Recommended Posts

alsalsa NPORA Newbie

alsalsa

Posted
Posted

Hello to all: Was wondering...my center dash where the ac/heat control located does not light up. Any one know where and how many bulbs needed? Can you exchange bulbs? Any help would be great. Thanks

Link to comment
Share on other sites
Slashjt NPORA Fulltime Resident

Slashjt

Posted
Posted

Hello to all: Was wondering...my center dash where the ac/heat control located does not light up. Any one know where and how many bulbs needed? Can you exchange bulbs? Any help would be great. Thanks

 

I have the same problem...

I have rounded dash.. but I don't know how to get that part off to change the bulbs

Link to comment
Share on other sites
1987caddy NPORA Veteran

1987caddy

Posted
Posted

On my 95, after you remove the surround from the dash you can take the whole control panel loose from the dash. There is a cover that snaps around the unit that has clips on the top and bottom. If you pop that loose you can see the bulb. Mine has a single bulb in the middle. My bulb is good but if you tap the outside with the lights on it will light up. If think the wires going to the plug to light everything up is loose. Hope this helps.

Link to comment
Share on other sites
alsalsa
NPORA Newbie

alsalsa

Posted
  • Author
Posted (edited)

On my 95, after you remove the surround from the dash you can take the whole control panel loose from the dash. There is a cover that snaps around the unit that has clips on the top and bottom. If you pop that loose you can see the bulb. Mine has a single bulb in the middle. My bulb is good but if you tap the outside with the lights on it will light up. If think the wires going to the plug to light everything up is loose. Hope this helps.

 

Thanks will try.

Edited by alsalsa
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...