30" Rear break line

[DanAK]

So I am finally ordering a set of fox 2.0 Pro remote reservoir 11" travel shock for my SFD because all summer I have been riding on my OME shocks and topping out on every bump. So this means I need to get a longer break line for the rear and I don't know jack about break lines!!!

 

Do I need a certain kind? are all break lines pretty much the same? can I order what I need online? and if so, where can I order them from?

 

I didn't think I would need help with this but after talking to my mechanic it sounds like getting anything other than a stock break line out here will be... frustrating

 

Thanks in advance for any helpful or insulting remarks heading my way!

 

-Dan

[01silvapathy]

PM'd

[KryptonFabrications]

I have them in stock. $45 + shipping. They are 25" length end-to-end but I'm fairly sure you won't be maxing it out.

[DanAK]

do you have front ones in stock as well? I wouldn't mind just changing them all while I am at it.

[KryptonFabrications]

Yup I do have fronts as well. You can order off our website and I can get those to you pretty quick.

 

Krypton Fabrications - R50 Lift Accessories

[pathblazin420]

its not very hard to make them. just need long enough line, couple fittins, and a good tubing bender (dont buy harbor freight, it will break after the first bend!)

 

I never did untill I couldnt get a replacement one for my s10 so i decided to make my own. Very simple and i was able to re run it the way i wanted too.

Edited September 29, 2010 by pathblazin420

[shift220]

its not very hard to make them. just need long enough line, couple fittins, and a good tubing bender (dont buy harbor freight, it will break after the first bend!)

 

I never did untill I couldnt get a replacement one for my s10 so i decided to make my own. Very simple and i was able to re run it the way i wanted too.

Using hardlines in place of flexible is generally not recommended

[DanAK]

okay, you said they are 25" in the rear, I thought it was supposed to be 27" or 30" how long is the original break line?

[KryptonFabrications]

I don't have my original rear line but if I remember correctly it was only about 14". I'm sure somebody could confirm on this. 25" gives you plenty of slack with a 4" lift in the rear.

[01silvapathy]

I got mine made to 27inches with the 4in sfd and 2in coils