Question about power steering belt

[ahardb0dy]

I replaced the belts on my 94 PF today and had a hard time getting the Power steering belt over the pulley, thought they sold me the wrong size as the belt that I took off was a 1/2 bigger, (the belt I bought was a 360mm the one that was on it was a 365mm)I thought the pump was hitting the block but it turned out it was just tight and I was finally able to get it to move slightly more and got the belt on. My question is about the lock down bolt, now that I got the belt on and adjusted, the lock down nut is right in front of the metal pipe that the radiator hose connects to, I was able to get it tight using an open end wrench but I don't think the lock down nut should end up directly behind that pipe. I think the belts were original as they say "Pitwork" on them which I think is the Japanese OEM brand (engine is a JDM engine), Anyone else notice this??

[MY1PATH]

some places will sell you the alty and PS belt as both the same size but others will give you 2 sizes aprox 1/2" apart....

 

 

[ahardb0dy]

the auto parts sold me 2 different sizes and I checked the number for the pwr steering belt on the manufacturers site (Dayco) and the number was correct, the 2 sizes were: pwr steering 360 mm long 17 mm wide, alt 370 mm long 17 mm wide