Odometer quit working, but speedometer still works suggestions?

[MadManMike]

Hey Guys,

 

So my Odometer and trip odometer quit working in my 1995 pathfinder. I took apart the dash took the cluster out and cleaned off the contacts installed it again and there was no change.

 

I read in another post that if my Spedometer is still working and my odometer isn't (which is the case) then it's not a wiring or sensor problem because they both feed from the same line (is this true?).

 

If the above is the case, it looks like my only option is to find a used cluster from a J/Y and roll the odometer to match mine (can you roll these odometers?)

 

Any suggestions for other fixes or input?

 

-Mike

[MY1PATH]

nope, Looking @ your cluster (electronic)the spedometer is a positional indicator like the tachomer and a separate in-dash motor runs the trip/odo.

 

the mechanical units on the other hand both feed from the same cable and the speedometer is shown as a spring resistance to a rotating magnet inside and steel drum.