NX4 Strut Spacers

[OfftourRoadie96]

I had a question reguarding the NX4 1" Strut Spacers where they had different options which I finally understand now....but the email reply I got from NX4 is what really intrigued me....

 

Post #35

NX4 Spacers

 

Good evening,

 

It all depends on what you, the customer, want. For example, the factory press in studs are 10mm, the nearest imperial size is 3/8" (9.525mm). This is more of a direct replacement. For added strength, I offer 7/16" (11.1125mm) fasteners, or 1/2" (12.7mm) fasteners, all GR8. 7/16" and 1/2" fasteners require some minor drilling in the strut mounts to accommodate the larger fasteners.

 

The option also exists (recommended but optional) to thread the fastener. This helps secure the fastener in place to assist in installation. I will also within a week or two, be offering complete upper strut assemblies with pressed in studs already in the lower mount, of the aformentioned sizes. This will eliminate any difficulties in assembling, and eliminate the need to thread the spacer.

 

If you wish, I will add you to our mailing list to keep you posted on product and service developments.

 

I hope this answers your questions

 

Warmest regards

 

Jeff Rimmer CET

Owner Operator

NX4 Industries

sales@nx4industries.com

www.nx4industries.com

 

 

COMPLETE UPPER STRUT ASSEMBLIES WITH BUILT IN SPACER!

[tekazgtr1984]

Complete upper strut assemblies with integrated spacers? That's a great idea!

[new4x4r]

I've got the NX4 strut spacers with the Half inch hardware... I haven't had a chance to put them on, but they look great sitting here :-)

[Daddy Rim]

I I will also within a week or two, be offering complete upper strut assemblies with pressed in studs already in the lower mount, of the aformentioned sizes. This will eliminate any difficulties in assembling, and eliminate the need to thread the spacer.

COMPLETE UPPER STRUT ASSEMBLIES WITH BUILT IN SPACER!

 

Just to provide some clarity, I'm going to offer this as additional options. Some folks may wish to purchase the lower plate with press in studs and the spacer only or perhaps including the upper isolator mount as well. For the initial offering, the spacer will mount on top of the isolator upper mount. It's not mounted in between the upper isolator mount and lower stud bracket. That will be coming in the near future.

 

Costs for all items mentioned will be posted on the site, again all in Canadian $. Unfortunately, this lower bracket will be a modified OEM unit, thus not made in Canada along with the isolator mount, which is a KYB. For some folks, and I'll be completely transparent here, you may get the isolator bracket cheaper from other vendors or parts stores. Might be shooting myself in the foot, but heck I wouldn't want to overpay, so why should you.

 

Please visit the website for official product launch updates.

www.nx4industries.com

 

Powder coating will be an option for all parts in the very near future as well. Just awaiting my new industrial setup