Jump to content

radio wires


ac92pathfinder
 Share

Recommended Posts

im tryin to hook up a new radio in my car and of course someone cut off the stock radio plug. can anyone tell me or direct me on finding the color code wires whats what before i start blowing fuses.

 

 

Man I wish I had seen this earlier. I just did a radio swap last night. If I pull it again I'll look at the colors.

Link to comment
Share on other sites

Here are the radio wire colors for my '89 Pathfinder. Hopefully they match yours. (The colors in () are the equivalent color on standard aftermarket stereos)

 

Brown = Left Front Speaker + (White)

Brown/White = Left Front Speaker - (White/Black)

Black = Right Front Speaker + (Gray)

Black/White = Right Front Speaker - (Gray/Black)

Green = Left Rear Speaker + (Green)

Green/Black = Left Rear Speaker - (Green/Black)

Gray = Right Rear Speaker + (Purple)

Gray/Red = Right Rear Speaker - (Purple/Black)

Red/Green = Constant Power (Yellow)

Green/White = Ignition Power (Red)

 

I connected the ground wire (Black) to a metal chassis part.

 

Hope that helps!

Link to comment
Share on other sites

you can also take a test light and find the positive(constant power) wire, then find the acc wire. Then once you find those two i take a 9 volt battery and take one of the extra wires and touch it to the batter. if you dont hear anything then drop one of the wires and do it again with a different one and so on until you finally hear a speaker make a crackle noise. then you found the two wires for that speaker. then do the same for the other for speakers and the wire left is going to be the ground lo. thats my way if ppl are dumb and dont just buy the 5 dollar harness lol works for me and I have never wrecked anything i personally always just buy the harness

Edited by edicer2
Link to comment
Share on other sites

Here are the radio wire colors for my '89 Pathfinder. Hopefully they match yours. (The colors in () are the equivalent color on standard aftermarket stereos)

 

Brown = Left Front Speaker + (White)

Brown/White = Left Front Speaker - (White/Black)

Black = Right Front Speaker + (Gray)

Black/White = Right Front Speaker - (Gray/Black)

Green = Left Rear Speaker + (Green)

Green/Black = Left Rear Speaker - (Green/Black)

Gray = Right Rear Speaker + (Purple)

Gray/Red = Right Rear Speaker - (Purple/Black)

Red/Green = Constant Power (Yellow)

Green/White = Ignition Power (Red)

 

I connected the ground wire (Black) to a metal chassis part.

 

Hope that helps!

thanks :)
Link to comment
Share on other sites

ha nice always cool when that happens huh
works good except the front speakers dont work might be another wire for them cause it was working. when i had the infiniety chrysler radio in it better then nothing lol Edited by ac92pathfinder
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...