Instrument panel lights

[Legalalien]

Has anybody run into this problem? The dash board lights on my 91 dont work I have already cleaned the multyfunktion switchin the steering colum and replased the dimer control but they still don't work. I puled out the intrument cluster and checked voltage on the pink/blue wire and get 12 volts then I checked the pink/black wire wish should be ground and get 12 volts also. I have checked al the wires and bulbs and can't find any ovious problem I'm frustrated so if any of you have had or seen this problem please HELP!!!

[94extreme]

you shouldn't be getting power out of both wires.

[Legalalien]

you shouldn't be getting power out of both wires.

I know , what I don't know is why i'm getting power on both ore were the short might be. Any Ideas?

[Nissyota88]

My Chit wasnt working either, check your rear taillights while your at it also (not your brake lights, but the lights that are on so people can see the rear of you) anyways mine ended up being a fuse... I just switched out my emergency signals for the fuse

[Legalalien]

My Chit wasnt working either, check your rear taillights while your at it also (not your brake lights, but the lights that are on so people can see the rear of you) anyways mine ended up being a fuse... I just switched out my emergency signals for the fuse

Tail lights are working perfrect and all the fuses check out ok, Im starting to think that I need a priest istead of a mechanic

[MikeV]

I seen the Exorcist a couple times; I may be able to help!-)

[Legalalien]

I seen the Exorcist a couple times; I may be able to help!-)

LOL!! You bring the holy water and I'll buy the beer

[94extreme]

hell, i'll supervise then. hehe

 

i am not sure which wire is supposed to be the (-) one but chase the it to see where it's shorted.

[mws]

Has anybody run into this problem? The dash board lights on my 91 dont work I have already cleaned the multyfunktion switchin the steering colum and replased the dimer control but they still don't work. I puled out the intrument cluster and checked voltage on the pink/blue wire and get 12 volts then I checked the pink/black wire wish should be ground and get 12 volts also. I have checked al the wires and bulbs and can't find any ovious problem I'm frustrated so if any of you have had or seen this problem please HELP!!!

 

 

If the ground wire is showing 12 volts, that means it is not connected to ground. Follow that wire, somewhere it is broken or disconnected.

[Legalalien]

I have no idea how but the lights are now working (I guess I wigled the right thing ) Thanks to all of you for your sugestions

If the ground wire is showing 12 volts, that means it is not connected to ground. Follow that wire, somewhere it is broken or disconnected.