Sourcing Parts! Help Needed Asap

[decoder]

I need to source two torsion bar adjusters, the ones at the rear of the torsion bar that twist to control the ride height. DEALER is NOT an option. I work for a dealer in calgary, and none are showing in the system. so im asking for some assistance. they became stripped under the pressure from the [censored] kit i installed.

 

decoder30@hotmail.com is my contact email.

 

thanks for any and all help gentleman.

 

Thank you.

[Adam]

I need to source two torsion bar adjusters, the ones at the rear of the torsion bar that twist to control the ride height. DEALER is NOT an option. I work for a dealer in calgary, and none are showing in the system. so im asking for some assistance. they became stripped under the pressure from the [censored] kit i installed.

 

decoder30@hotmail.com is my contact email.

 

thanks for any and all help gentleman.

 

Thank you.

 

go to a junkyard man... hell i even got mine from a 2wd pathy, they are the same between 2wd and 4wd. i got mine for free that way.

[decoder]

go to a junkyard man... hell i even got mine from a 2wd pathy, they are the same between 2wd and 4wd. i got mine for free that way.

 

 

just cant seem to find one that way

do they come out of that crossmember they are in? or can you tap them out?

 

im not sure if there are any around here in calgary in the junkyards

[Adam]

just cant seem to find one that way

do they come out of that crossmember they are in? or can you tap them out?

 

im not sure if there are any around here in calgary in the junkyards

of course they come out, you just need to pull the torsion bar out of them...

[88pathoffroad]

You don't even need to take the t-bar out, they come off and out of the crossmember with the t-bars in place if you're patient. I have a pair of extras, but they're my spares in case I strip one out.

[decoder]

ok, is there a company that sells these besides the dealer?

there are no pathfinders at the junkyards here in calgary. i was on the phone with all of them today

[Adam]

ok, is there a company that sells these besides the dealer?

there are no pathfinders at the junkyards here in calgary. i was on the phone with all of them today

what about hardbodies? i think they have the same t-bar setup...

[decoder]

well id really like to source a new part, not a junkyard.

[88pathoffroad]

The only place you're going to find new ones is possibly Ebay or a dealership.