Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

bolts

milehighcowboy

By milehighcowboy,
in The Garage

 Share

Recommended Posts

milehighcowboy NPORA Old-Timer

milehighcowboy

Posted
Posted (edited)

i know there are a lot of guys doing a 5spd conversion right now so i figured some one will have these bolts lying around for the install. i need pics of all the bell housing bolts (that are used for the 5spd) and the starter bolt/nut (if there is one). help please?

ben

 

:help:

Edited by milehighcowboy
Link to comment
Share on other sites
sammyb33 NPORA Old-Timer

sammyb33

Posted
Posted

i thought u ordered them..... and i would say that you can have the leftovers i had but it turns out i am going to be needing them now man.

 

why do you need pictures? i thought i sent u the manual with the drawing...and i thought u had the tranny mated already....

Link to comment
Share on other sites
max_stryker NPORA Old-Timer

max_stryker

Posted
Posted

Hes got it mated, but he someone told him the starter bolts are a different length, which they arnt. and someone told him i know on the autos there are something like 9 bolts and on the manuals there are only something like 8 bolts..

 

dude ill send you pics tomorrow as im not going to be out late tonight. and ill sho you how everything looks with a 5 speed installed

Link to comment
Share on other sites
sammyb33 NPORA Old-Timer

sammyb33

Posted
Posted (edited)

wait what???? dude, that was a factory FSM i got the pictures out of.

 

what did you strip?

 

 

EDIT:: i got the lengths out of the FSM, i dont know why it would not be long enough, unless you arent using the correct bolts in the correct holes...the FSM i sent you also showed where those lenght bolts go. are you stuck on the starter bolts? because i could use the same ones from my auto to my manual....i actually have those out if you want pictures of where they go, and i can measure them as well (it wont be totally exact, i dont have exact measuring tools here) but i mean i can get close....

Edited by sammyb33
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...