SPUTTERING AND STALLING

[BUCKAROO]

ANYONE

 

I JUST BOUGHT THIS 95 SE 4X4 WITH THE VG3000

MOTOR DONT KNOW ANYTHING ABOUT THESE THINGS

BUT ANYWAY !!!!!!!!!

2 DAYS AGO I PUT A THING OF GUMOUT ALL-IN-ONE CLEANER

IN HER AND TODAY SHE RAN ABOUT 100 YARDS THEN WOULD SPIT AND STALL

ON ME LET SET AWHILE AND WILL START HARD AND RUN 100 YARDS DO SAME THING THOUGHT MAYBE FUEL FILTER CHANGED THAT DIDNT FIX PROBLEM

CAN ANYONE TELL ME IF THAT S@#t I PUT IN IT SCREW SOMETHING UP

OR MAYBE OTHER THINGS THAT IT MAY BE

THANX

[vengeful]

Moving to WD21 Forum.

 

Also, please don't write posts in ALL CAPS. It is very hard to read and gives the impression that you are screaming. You will get a better response if you form your posts coherently and with proper grammar and syntax.

[k9sar]

first thing is to check your ECU for error codes (search for it ). It definately sounds like a fuel problem and could be the fuel pressure, filter or possibly the injectors. The VG30 will run on 3 cylinders if you let it (not well but it will) so the chance of 3 or more injectors going out at the same time is unlikely.

 

how'd it run before you put the gumup in it? Any chance you used th wrong stuff for the wrong application?

 

Have you checked your MAF? You can pop the hood, have someone start it and you can wiggle the wire/connector on the MAF to see if it makes a difference.

 

If it runs rough always as opposed to running ok for a little the dying, maybe it's the timing.

 

There are a few things to check but first is the ECU.

 

Keep us posted as to what you find and we can continue the diagnostics and hopefully help others who may have similar issues

[k9sar]

also... that crap needs to be added to a full tank (or added then the tank filled). If your tank was low, you're running too wierd of a mixture

[5523Pathfinder]

Put the ECU into fail-safe by disconnecting the Air flow meter and see if it runs better. Check codes first, though.