Jump to content

vacuum


87pathfinder4banger
 Share

Recommended Posts

something's wierd with the way mine's running and i think it's a vacuum hose, but im not sure since i have nothing to go off of

 

Ummmm.....have you looked to see if any are missing or disconnected? That'd be a pretty obvious find. Other than that, I don't see why you'd need a manual diagram of the system setup.

Link to comment
Share on other sites

there aren't that many vacuum hoses for either the z24 or the vg30 ... you should be able to visually inspect everything and should notice if anything is missing ... the REAL thing to look out is to see if there are any that are cracked, or not sealing properly in which case they will need to be cut down and remounted provided there is still enough length ...

 

a TBI to manifold leak could be considered a vacuum leak too ... so check that ...

 

 

an easy way to check it all is to spray certain areas with a can of engine start ... any leaks will suck it in and you will hear the idle go up on the engine ...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...