BobbyD Posted November 23, 2006 Share Posted November 23, 2006 Don't know if something is wrong with the front end or that is just the turning radius. When I try to make a U turn I need to back up because their is not enough room. Also when I am turning and go up lets say on a curb, I get a bending type metal sound. Everytime I get my Pathy greased the mechanic never says anything about the front end. Can I make my turning radius bigger? Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted November 23, 2006 Share Posted November 23, 2006 I actually think my Pathfinder has a very tight turning radius. That metal grinding sound you're heading is the steering stops grinding at full steering lock. Link to comment Share on other sites More sharing options...
88pathoffroad Posted November 23, 2006 Share Posted November 23, 2006 Re-adjust the steering stops. Link to comment Share on other sites More sharing options...
bear claw Posted November 23, 2006 Share Posted November 23, 2006 You can always get to speed then you give a quick jerk to the steering wheel while working the hand brake or downshift and kick down the gas to lose rear tire traction (2wd only) and give the steering wheel another jerk P.S. both techniques need practice Watch for roll over though Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now