Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Pulled codes...

89_trailboss

By 89_trailboss,
in The Garage

 Share

Recommended Posts

89_trailboss NPORA Old-Timer

89_trailboss

Posted
Posted

finaly pulled my codes on my 89 VG30i. not as bad as I though it would be, but still... anyways, heres the damage:

 

11: Crank Angle Sensor/Camshaft Position Sensor

 

21: Ignition Signal

 

33: 02 sensor

 

02 will be replaced this weekend if it comes in.

 

now the other two tho... the ignition signal I have no clue where to look. only shop manual we have is for 94 and I cant find anything on it. but from the diagrams in the shop manul, the Camshaft position sensor is built into the distributor, and and the igniton coild is wired to the position sensor. so im woundering if fixing code 21 will help with 11. just a shot in the dark tho.

 

anyone have any clues on where to start with codes 21 and 11?

 

thanks alot,

Dallas :beer:

Link to comment
Share on other sites
89_trailboss
NPORA Old-Timer

89_trailboss

Posted
  • Author
Posted (edited)

well after a quick seach, looks like distributor and the little black box beside the coil will need to be replaced.

 

but I also found a guy saying that he found JSUT the crank postion sensor. heres the info:

 

www.net-parts-express.com

 

part# NI036449

 

Made by FACET

 

Site says:

 

"Crank Position Sensor

fits O.E. Dist #'s 22100-16E00

22100-16E03

CRANK ANGLE SNR"

 

anyone have any thoughs on what I should do?

 

sounds like code 11 mixed with my 02 could be a cause of @!*%y milage,power, and rich smell.

 

also, my truck wants to stall upon first start(about first 1-2 min of start up) and has a good hesitation/almost miss sound at 3500-4500ish also almost stall when accelerating from stops. but only some of the time. some days its every stop, others it will never happen. any thoughs?

Edited by 89_trailboss
Link to comment
Share on other sites
RedPath88 NPORA Old-Timer

RedPath88

Posted
Posted (edited)

I have heard of people getting faults reads on code 11.. have you tried clearing the codes and running it to see if acts the same and if the code returns?

 

I have replaced the Dis. once.. not usually a cheap option :nono:

Edited by RedPath88
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...