seanj Posted October 6, 2006 Share Posted October 6, 2006 normally to check a front end for possible damaged components i would raise the front supported under the control arms and go from there. the book says you can't check ball joint play with the vehicle supported under the ball joints (control arms) hmm. 92 xev6 4x4. thanks Link to comment Share on other sites More sharing options...
94extreme Posted October 6, 2006 Share Posted October 6, 2006 correct.. pick it up in the middle of the front skid plate... it's a bit of a balancing act and the jack better be tall. Link to comment Share on other sites More sharing options...
88pathoffroad Posted October 6, 2006 Share Posted October 6, 2006 Or use two jackstands under the front crossmember. Link to comment Share on other sites More sharing options...
94extreme Posted October 6, 2006 Share Posted October 6, 2006 Or use two jackstands under the front crossmember. frame rails where the bend outwards works too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now