Jimmie

Were is the vacuum cut valve located ?

Is the factory size M10 x 1.50 x 52mm ? What is the improved version ?

Reverse went out and a transmission shop rebuilt the tranny. Now reverse works good but in the forward gears it will shift to 1 to 2 but will not shift out of second. He pulled it again and went through the tranny again and it done the same thing. He found another one with just 40 thousand miles put it in and it done the same thing. He went through the wires in from the transmission up to the firewall. Also ran the codes and they checked ok. I found another computer today at Pull-A-Part and it still does the same thing. Anybody have any ideas ?? Jim

What year auto transmission computers will swap out in my 95 Auto ? Anybody ever had one to go bad ? Jim

Is there a access door under the floor mat for the fuel pump on a 2005 Pathfinder ????

I pulled the fuse on mine cranked it to relive the pressure. Number 5 was bad on my 95 Pathfinder , went to the junk yard paid $5.00 for a used one. When cold my Pathfinder worked fine but drive some were shut it off and get back in would run rough with the check engine light for a few minutes.Checked it with a ohm meter when cold was fine but when it was hot it went past 1m ohms .