poachr

Hey everyone, what size are the sway bar's on a 90' se 4x4 ? I need to replace my bushings and looking on line I see 20mm and 23mm sizes? I am looking at going with the energy suspension ones at rockauto. I just got the rig yesterday and put it in the show and started going through it seeing what all needs overhauling. I have also also been researching on changing the timing belt, water pump and cam seals. I was un able to get any info about when the belt had been done, the guy who owned it passed away and the wife didn't know any thing about it other than he had to have the water pump replaced a few years ago. It has 282k on it new starter, fires right up no smoking and runs good, not a rattle or squeak. Jacked it up today and checked the ball joints they seemed good. All of the bushings need replaced though.

Thanks for sharing the video, that is pretty amazing how well he cleaned those engine bays.

One other quick question, which is the best service manual, Chiltons or Haines?

Hey everyone, new member and new owner of a 90' se 4x4 mt. I would like to clean the engine bay. How should I go about this? Is it advisable to spray the engine with "Gunk" engine degreaser then use a pressure washer with the pressure turned down? Some guideance would be greatly apprecciated.

I was reading up on changing the timing belt.

Just picked up a 90' se 4x4 with a mt. So started doing some reading up on what to pay attention to. It has 282k on it no rattles drives nice and super straight. Started cleaning today and checking everything and where to start massaging.