Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST


  • Posts

  • Joined

  • Last visited

Everything posted by JPMAT0S

  1. I saw i can use land rover spring im just not sure which ones aswell im not trying to break the bank
  2. I need help to find the stock spring height for the rear of a 2000 pathfinder se.i want to go atleast 1 inch higher than stock.im not trying to go higher than that.i only mainly want it for a bit better towing , suspension,and asthetics with stock rims and tires. I just redid my front suspension so I’ll probably just use a 1 inch spacer for the front but i greatly need new springs for the rear aswell as shock absorbers because with my friend weighing at 250lbs and siting in my trunk the the rear tires are touching the wheel wells and even going over bumps while off-roading too so im constantly bottoming out and hitting the bumps stop in the rear which is the only thing saving my frame from cracking

Welcome to NPORA Forums


Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.



  • Create New...