- Sign In Changes: You now need to sign in using the email address associated with your account, combined with your current password. Using your display name and password is no longer supported.
- If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.
oversteer
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by oversteer
-
I aligned the upper perch with the notch on the back (engine side) of the strut itself
-
Thank you for the quick help. Got the struts and new end links back together. Drives great!
-
Just to confirm, there is no way to do this wrong (assuming the strut tops stay on the original side) and change camber.
-
First time poster here. I started putting struts (no lift) on my '01 last night. I noticed the strut top bearings are marked L and R. They appear to control camber adjustment. Everything I've read says that front camber cannot be adjusted without aftermarket eccentric bolts. Can anyone confirm that these bearings I'm lookiing at control camber? I'm concerned with getting that back where they started. Is there some method of installing the strut and bearing in the same orientation? The L and R are visible on the tops of the mounts from inside the engine bay. Thanks in advance..