Jump to content

UPDATE - Unfortunately, the data that was lost is unrecoverable by the host.  If you joined between May 26th and Jan 13th please feel free to sign up again.  In addition, all posts and messages during that time have also been lost.  At this point there is nothing that can be done, other than to move forward from here.


Thank you for your patience and understanding.

-NPORA Mod Team

*Updated: 02/06/2022 5:26PM PST


  • Posts

  • Joined

  • Last visited

Previous Fields

  • Your Pathfinder Info
    1993 SE 5 speed 183k original owner
  • Place of Residence
  • Mechanical Skill Level
    Wrench And Socket Set Mechanic
  • Your Age
  • What do you consider yourself?
    Rarely Go Off-Road
  • Model
  • Year

Profile Information

  • Location
  • Country
    United States

Rooster67's Achievements

NPORA Newbie

NPORA Newbie (1/5)



  1. My exterior door handle cracked and broke off. Has anyone had to replace one?
  2. Ok thanks. Don't know of any other people that have one. Hard to find Pathys in the junk yard also. Been looking for a dimmer switch with no luck.
  3. Any good way to check the timer?
  4. Dome light seems to be working properly.. Cargo bulb was bad. Replaced it. Now it works. The switch at each door opening operates correctly. Where's the switch for the back hatch?
  5. I rechecked the solder connections and had my son look as well. My eyes are shot. He says none are touching each other. I pulled the switch panel from the drivers door and took it apart. Checked continuity on the door lock points. All seems good there.
  6. 93 Pathy. Door locks haven't worked for years. Read this and soldered what looked like some loose connections on the door timer. Locks work now but lock automatically. When I get in and lock the doors then unlock and open the door as if I'm getting out of the vehicle the shut the door they all lock automatically. Any suggestions? Thanks in advance.

Welcome to NPORA Forums


Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.



  • Create New...