lerch641
-
Posts
285 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Calendar
Posts posted by lerch641
-
-
Looks like my friends hand after he ran razor wire with only leather gloves. Nice slashes across his palms that took a couple months to heal up.
-
Hurray! Congratulations on it not being any worse!
-
Towing hooks under my bumper. Had to drill new holes to make it fit and I just need to grab washers for the original tow loop.
-
The arm would be in the tool kit I mentioned, which I'm guessing you don't have anymore. It's a little leather pouch. Try a junk yard and pick one up?
-
That strap was for the tool kit, if you still have one.
-
1
-
-
That reminds me, I need to clean my upholstery and carpeting sometime.
-
I'm surprised there's not alot of rust around the wheel arches seeing as you're in NB.
Very clean in fact, I'm jealous.
-
1
-
-
So the position and size of lamp you've got doesn't make contact with the hood when it's open?
-
Good luck on reviving your ride!
-
I think I saw your picture on the R50 page.
Fleury's spacers are out of shot on the top.
-
Picked up my R50 from the shop, had it in for a little tuning and because I wasn't getting washer fluid in the windshield. They got me sorted out and free of charge!
-
I've got my Goodyear Wranglers with the lettering out, looks pretty sharp and I picked them up for about $430 each (tire and rim) at Fountain Tire (military deal, so why not?).
-
As Precise said, pull the plugs before you turn it over.
I just had this happen to me 2 weeks ago and had to tow my Pathy back (just took it straight to the shop) and they said I was lucky to not have gotten it turned over as a couple cylinders were full of water.
-
Man I just wish I had the post count, maybe next month
-
That's odd that it takes that long to engage, mine doesn't like go straight into reverse from park after sitting for a bit, but I can usually get it engage after jiggling between reverse and drive.
Though if you have a manual that'd be different.
-
Thanks for the links, I'm gonna be hunting for parts at the hardware store next weekend now.
-
200km trip to Winnipeg, first long drive since I got my lift and new tires and there's no problems so I'm very pleased.
-
Awesome find! I always liked the 2-door Pathy's. Looks like all your glass is good.
-
Okay, general snorkel thread;
After recent adventures it's become apparent that I need a snorkel, SO! I know there's a few off-the-shelf kits for the R50's, but who has made their own? What did you use and do?
Pictures are good!
-
I never had a problem with the spray on stuff. I did my side skirts and hood with Dura-coat rattle cans and both came out good and solid.
First time I didn't sand/score the surface first so it peeled off in most places. I pressure washed it and sanded it down and redid it. Much better now and still solid.
I was toying with the idea of lining the floors inside, but that'll be a winter project.
-
Congrats and week deserved too!
-
1
-
-
I've got them installed above without any issues.
-
Towed it to the shop last night after flooding the engine, scheduled it in this morning and dodged a bullet because it only hydro locked and didn't damage the engine any further.
Phew!
-
You don't have any scrap yards nearby that you can visit?
The side marker lights are sold as a whole unit, not just the plastic. That said, most of these parts I'd just pick up off eBay if I couldn't find one in a yard.
What did you do to your Pathfinder today?
in The Garage
Posted · Edited by lerch641
Glad to hear CDN_S4.
Me and a friend went test driving cars and trucks today, drove my Pathy to each dealership and told I wanted it new. Nissan obviously had the Xterra and Toyota let me drive a very nice 4Runner.