bochoda

Thanks for the link, still have to get some parts but it is coming along nicely. This is the first time tinkering round with using different models so it's been a good learning curve

Thanks for the info, I am using the QD32 clutch fork and throw out bearing. Been nutting out on another forum aswell and have worked out that my slave cylinder pin is about 10-15mm too short, so I am going to make a new longer pin and see how that goes. Will post results of the new pin Thanks again

Thanks for the info, I am using the QD32 clutch fork and throw out bearing. Been nutting out on another forum aswell and have worked out that my slave cylinder pin is about 10-15mm too short, so I am going to make a new longer pin and see how that goes. Thanks again

Did I need to change the clutch pivot pin?? If so what one?? can I use a QD32 slave cylinder with the TD27 pin?? Was I suppose to change the bell housing to the TD27??

Hi all, I am wanting to talk to someone who has done the gearbox swap from the td27 gearbox to the qd32 gearbox. I have just done the swap and need to clarify a few things Thanks in advance David

Ok peeps I need your help, I am wanting to do the 2wd steering upgrade on my 89 Nissan Terrano. What I need to know is what year D21 pathfinder drag link and inner TRE's do I need?? And does it matter that mine is a wide body Terrano? Thanks in advance

Thanks for your help Leo94, never knew that about the d22 box, might just go with that, bigger and better. As for the diff I thought it might be stuffed too thought I heard 2 bangs when I was out having some fun ooops lol

Hey all, I need some help in deciding what to do about my gearbox, currently it is stuffed (howls in 1, 2, 3, 4 NOT 5th) For the gearbox What I want to know is, 1- is it hard to repair yourself?? 2- is there any other boxes that would fit that are better?? 3- am I best just just to put it in the shop and let the pro's do it Front diff issues - when I engage 4lo or 4hi I am getting NO drive out of the front diff, I have jacked the back of the truck up and engaged 4lo, driveshaft to front diff turns but NOTHING turns out of the diff. Any body had this issue or may know what could be causing it ie; Broken cv, busted front diff etc etc FYI- its a Terrano 2.7 turbo diesel manual. Thanks in advance David