Jump to content

Reecehenry

Members
 View Profile  See their activity

  • Posts

    19

  • Joined

  • Last visited

 Content Type 

Posts posted by Reecehenry

    fuel gauge problems

    in 90-95 WD21 Pathfinders

    Posted

    So i bought my pathy about a year ago and since then ive done a lot to it (bigger tires, lift, fender trim, ect.) and ever since the day i bought it the fuel gauge has been reading wrong... when i fill it up it reads full, but after i use about an eighth of a tank it reads like half full then about another eighth im at a quarter, and it sits at a quarter until it actually has about a quarter, then it starts to read correctly until its on E... can anyone diagnose this problem?

     

    thanks for any help

     

    -Reece

    Sas rear axle?

    in Solid Axle Swaps, Hardcore Custom Fab

    Posted

    So SteevO, all I gotta do is buy an axle off of a wagoneer or something, and you sell all of the other required parts to put it together? And the 3rd member is the same as the axle housing right?

     

    Also when I do the swap I don't have to mess with the gears or anything on my rear axle do I?

     

    Sorry for asking so many dumb questions...

    Sas rear axle?

    in Solid Axle Swaps, Hardcore Custom Fab

    Posted

    I know I'm a newby for asking but I've been confused for a while and couldn't find the info I needed... When you d a sas do you have to replace the rear axle also? And is this https://ruggedrocksoffroad.com/nissan-h233b-front-axle-housing-by-diamond-axle-p-57856.html an actual axle, cause it says axle housing... And if its not too much trouble could someone make a list or link me to one that tells how to do a sas for newbies, just so I can get an idea of it...

    Thanks in advance

    -Reece

    Putting hardbody fenders on a pathfinder

    in 90-95 WD21 Pathfinders

    Posted

    Thanks for all the help guys!!! And nunya, I've already taken a die cutter to the rear, so it angles from near the top of the tire to the bottom of the tail lights, and I replaced the bumper with a big tube like bumper that I got off a friends jeep (cause he rolled it, and was parting it out)... Next step is front prerunner bumper, and upgrading my 32inch mts, to 35 inch Mickey Thompson baja claws! And one of these days when the time (and money) is right ill get to work on my long travel suspension dreams lol!

    Driver side tie rod

    in 90-95 WD21 Pathfinders

    Posted

    Yeah, I replaced all my ifs about 3 months ago, and I ran into the same problem... I was stumped for about 30 minutes then I got the genius idea to screw it in backwards and it worked.. So instead of "righty tighty lefty loosy", make it "lefty tighty righty loosy"... It's one of those things that makes you feel really dumb once you figure it out :)

     

    Good luck, hope this helps!

    Putting hardbody fenders on a pathfinder

    in 90-95 WD21 Pathfinders

    Posted

    So I'm new here, and I'm about to buy some hardbody fiberglass fenders, but before I buy them I wanted to check up on a few things...

    1. Will hardbody fenders fit my pathfinder (1992,se).

    2. Do I need anything else in order for it to all fit together correctly?

    3. Has anyone had any experience with this type of fender

    And if they won't fit, does anyone know where I can get some that will...

    The link to the fenders is here... http://www.andysautosport.com/nissan/1987_1997_hardbody/exterior/fenders/fiberglass_fenders/hannemann/eric00010906.html

     

    Thanks for any help -Reece

×
×
  • Create New...