Reecehenry

so i know that you can buy a certain year model of jgc coils to give around 2.5 to 3 inches of lift on a pathfinder... but what if i were to get lifted jeep coils (like jgc 2-3 inch lift coils)? would that not give me 5-6 inches of lift? just a thought, im probably wrong but idk...

so im thinking about bed lining my whole pathy... just wondering what you guys'es opinion's are, and if someone has experience could you share... thanks -Reece

lol i dont know why that posted twice.....

thanks for the responses... manik, is the access plate under the carpet in the trunk area (behind the back seats)? And if i test it and it reads bad, do i just replace it?

thanks for the responses... manik, is the access plate under the carpet in the trunk area (behind the back seats)? And if i test it and it reads bad, do i just replace it?

So i bought my pathy about a year ago and since then ive done a lot to it (bigger tires, lift, fender trim, ect.) and ever since the day i bought it the fuel gauge has been reading wrong... when i fill it up it reads full, but after i use about an eighth of a tank it reads like half full then about another eighth im at a quarter, and it sits at a quarter until it actually has about a quarter, then it starts to read correctly until its on E... can anyone diagnose this problem? thanks for any help -Reece

sorry for not responding for a while, i went on vacation and couldnt get online... so if i bought something like that what else would i need?

Would this work? http://oklahomacity.craigslist.org/pts/3938679292.html

So SteevO, all I gotta do is buy an axle off of a wagoneer or something, and you sell all of the other required parts to put it together? And the 3rd member is the same as the axle housing right? Also when I do the swap I don't have to mess with the gears or anything on my rear axle do I? Sorry for asking so many dumb questions...

Thanks man

I know I'm a newby for asking but I've been confused for a while and couldn't find the info I needed... When you d a sas do you have to replace the rear axle also? And is this https://ruggedrocksoffroad.com/nissan-h233b-front-axle-housing-by-diamond-axle-p-57856.html an actual axle, cause it says axle housing... And if its not too much trouble could someone make a list or link me to one that tells how to do a sas for newbies, just so I can get an idea of it... Thanks in advance -Reece

That's awesome man! I've been wanting to do this for soooo long... I even bought the piping for it, but I still haven't got around to it yet... Post some pics when it's all done!

Thanks for all the help guys!!! And nunya, I've already taken a die cutter to the rear, so it angles from near the top of the tire to the bottom of the tail lights, and I replaced the bumper with a big tube like bumper that I got off a friends jeep (cause he rolled it, and was parting it out)... Next step is front prerunner bumper, and upgrading my 32inch mts, to 35 inch Mickey Thompson baja claws! And one of these days when the time (and money) is right ill get to work on my long travel suspension dreams lol!

New

Thanks for the heads up... I was driving barefoot I few days ago and i had to keep my feet elevated because the floor was scorching hot lol

Lol I will!

Thanks for the reply.. And I honestly just like the "prerunner" look.. After I get these on the next step will be building a baja bumper!

Yeah, I replaced all my ifs about 3 months ago, and I ran into the same problem... I was stumped for about 30 minutes then I got the genius idea to screw it in backwards and it worked.. So instead of "righty tighty lefty loosy", make it "lefty tighty righty loosy"... It's one of those things that makes you feel really dumb once you figure it out Good luck, hope this helps!

So I'm new here, and I'm about to buy some hardbody fiberglass fenders, but before I buy them I wanted to check up on a few things... 1. Will hardbody fenders fit my pathfinder (1992,se). 2. Do I need anything else in order for it to all fit together correctly? 3. Has anyone had any experience with this type of fender And if they won't fit, does anyone know where I can get some that will... The link to the fenders is here... http://www.andysautosport.com/nissan/1987_1997_hardbody/exterior/fenders/fiberglass_fenders/hannemann/eric00010906.html Thanks for any help -Reece