Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

agenda893

Members
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

 Content Type 

Everything posted by agenda893

  1. agenda893
    http://www.4x4parts.com/i-18980130-pathfinder-aluminum-front-bullbar.html- there's also this option if you are looking for something upgraded from the original bumper.
  2. agenda893
    I had the same problem some of you were having getting my keyless entry into programming mode. No matter what I did I couldn't get the lights to flash. Skip forward a couple years to today, I was checking fluid levels under the hood before a road trip and saw the control box on the drivers side that said Keyless Entry on it, and thought maybe I should take a quick look under the panel. Everything looked OK - the brown box was where it should be. I tried to remove it but only got it part way and didn't want to force it and risk damage so I just stuck it back into place. It felt like it reseated so I hopped back in the drivers seat, locked the doors, stuck the key in and out, in and out, and right when I was about to give up for the last time it flashed. I turned to aux, hit a button on the keychain and I NOW HAVE WORKING KEYLESS ENTRY!!! I'm pretty excited.
  3. agenda893
    I figured out that it's the smart entry control module. I don't get the ringing noise when I have my headlights on, door open or key in the ignition either. Looks like I'm in for a project...
  4. agenda893
    Model: x32a1 fccid: x32a ic:8797a-a purchased from iKeyless.com specific to the '98 r50. The main issue isn't the fob as far as I can tell. After sticking the key in and out of the ignition I can't get the lights to flash to go to the next step. When I first started trying it did flash one time, but I haven't been able to get it to again. I'm hoping there is some other way to get it into programming mode.
  5. agenda893
    I hate to be the guy to revive a zombie thread but here it goes. I'm trying to program a RKE on a 1998 SE and can't get into the programming mode. I've tried a bunch of times and only once did I get the lights to flash, but then it didn't seem to take with the remote. Now every time I try sticking the key in and out of the ignition I get nowhere - no lights flashing. Is there a trick to the timing or some other way to get this done?
×
×
  • Create New...