jhamelin819
-
Posts
88 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by jhamelin819
-
-
i know there is an old post about this, but does anyone have any cool ideas for interior mods that can help with adding more storage, or space, or just look friggen cool, ive already made a cargo mat for the rear, and am just using a large tote placed beside my subs for tool box, tool, and parts storage. but if anyone has any cool ideas about tool storage or any kinda storage, or fastening a permanent/semi permanent tool box, id love to know as well!
thanks -josh
-
and rigid light bar, 4 wheel parts.com
-
no extra power needed,
-
led light bar has amazing fog/spot combos, 20 inch would be perfect, i have run kc's which are also amazing, but the led's are a bit better and more durable, althoe you will pay alot more for the led light bar and inside switching is an easy instal, run it on a toggle switch or wire it to your high beams.
-
when ya got a stock rig besides rims and tires..... and a friggen open diff and itll still go 10 times the places as other vehicles
-
1
-
-
any one hack the tail pipe off and just run cat back straight?
-
bfg at ko's, 31 10.5 15's, not as bad as id thought theyd be, just gotta watch it on the polished ice, great in the deep snow
-
i wanna change up my exhaust sound, just make it louder, i dont care if it sounds like a chopped v6, i just wanna make sure whatever i do is healthy for the motor
-
if you live in a normally warm climate, id recomend running a multi viscocity 10w30, thats what i run in my r50 durring summer months,
-
put some air in the tires.... friggen hard work
-
up here in canada, as long as you got your licenses and it aint full auto, you can own whatever ya want!
wish it was like down south thoe.....
-
if you can, deeper rims are a little better
-
1
-
-
97 xe, just about to roll over on 180xxx clicks
-
its jumping out of your normal high range gears? 1 through 5? sounds like a bad syncro through all of the gears
-
good call, thank you 
lol-
1
-
-
well since im on here, may as well ask, any one know how to grease the front drive (prop) shaft? ive tried so many times, but i cant get it to work.
-
well, only time i will ever say this, but thank you jeep for helping out a pathfinder owner
-
1
-
-
and how do you flare out the ends?
-
where is a good place to relocate it too??
-
yes, well over a grand in some cases, ill probably just mod a cherokee bumper, super easy to do from what it looks, and xj bumpers run from 200 to 500 bucks lol
-
2
-
-
they will fit, they will clear the struts and all just fine, but especially when turning in reverse they will rub like all hell, even with a 2 inch lift.
31's are the max i would recomend
-
brake in a clutch? heat cycle it, use it lightly for the first few running minutes, or else extra stress will be put on it. allow it to warm up with the engine. when its warm, dont go hard on it as in dumping it, but it might need to be ridden a bit to burn it in a bit. the clutch is broken in good when it falls into, or will stay in adjustment well. Mainly, just go easy on it for the first few running hours
---josh
-
alright another r50 owner!!!
-
alright awsome thank you!!!!
From bad to worse! Rusted out rear frame..
in 90-95 WD21 Pathfinders
Posted
well, frame weld ins do work well, but its gotta be a good weld, and done to a healthy spot on the frame. if you can get it done at a fair price do it, if its too expencive, id say forget it