captandy

took off flares on my 03 r-50,, gonna rhino line and reinstall,, broke a few clips .. one that goes into the body of the fender and one that clips inside fender flairs.. Any body got an idea or a link?

tires be here tmmrw...

I put the hubs on as well.

I have been lucky enough to have done this before with my 98..now my 2003......This was easier!!Went from this To this.... In four easy hours..,. Thanks guys...

or do the spacers at the same time the front struts and springs go on??new ac 2" gr2 struts and mikes new strut spacers from ac hes making now.. Can i do them at the same time??

Warn locking hubs for new 2003 project??or go with an "off brand "

Hey guys been awhile and decided to pull the trigger on another r50.. 2003 and im starting over again...In your opinions, what is the best all around a/t tire for my stock 2003 ?? Max size with no lift and your input counts... Thanks andy

any opinions??

wow..pulled the trigger too fast a courtesy!thanksAlkorahil.next time . had no idea you sold parts. should have done my homework

found the part.. http://www.courtesyp...tml?cPath=4700 10 bucks to ship it....

just checked my rear pumpkin and had some water again.. any body got pics of where their breather tube is set? i dont have one that i can see and im guessing thats the only way its getin in.....

no replace//// it just broke and was kinda loose.... i hate loose! at six bucks a piece..........plus shipping....

Found it!!! thanks....

rear bumper clip,, saw some on e-bay but none like this....

you know how i feel!

thanks ... all done

silicone spray down the channels worked like a champ for a year...

thanks guys..

plug wires and plugs.... so MANY choices... what do you think?

awsome.. looks factory

we have identical setups and im convinced rubbing on flares will not be an issue..could be wrong,i dont have flares, the tires get delivered http://www.discountt.../direct/home.do (by the way ihave ordered multiple tires and never had a better shopping experience than here..the staff is awesome and theres always a little extra discount when you ask nice) and when you see them you will have yourself convinced no way they will fit!!! then BAM!!!wow! a little triming,(I used a steak knife) the right hand crank rub is against the frame.

got it done 3 minutes ...Thanks alot towncivilian

Any one got experience repacing regulator and motor? got panel off etc. but i know theres always a trick!! http://www.ebay.com/itm/130573705813?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

im not sure but it looks like it.. if not i did the "easy connect harness"for mine and it was plug and play... very simple//http://www.ebay.com/itm/Trailer-Hitch-Wiring-96-04-Nissan-Pathfinder-98-01-Altima-97-03-Infiniti-QX4-/180957178385?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1998%7CMake%3ANissan%7CModel%3APathfinder&hash=item2a21e36a11&vxp=mtr

i love my bfgs 33x10.5x15 mimimal rub at full crank right hard turn..