- Sign In Changes: You now need to sign in using the email address associated with your account, combined with your current password. Using your display name and password is no longer supported.
- If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.
Pauls
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Pauls
-
Problem solved, counted the teeth, BUT, there is an odd whine coming from the timing belt area........
-
Well the #1 is at TDC and the cam sprocket above that piston has its dimple lined up with the dimple on the back cover so I am under the impression that is compression.
-
Hey guys, new to the forum, thanks for the opportunity to be a part of it. I just did my timing belt, first surpirse was the fact that there was no timing mark for the crank, the sprocket on the crank had a dimple, but there was nothing to match it up to, so I made a mark just in case. Before I took the belt off ,I also put the cam sprockets to the marks on the rear cover. So, with this i took the belt off, as I was putting on the new one, the passenger side sprocket got out of place, I rotated it the same way the engine would back to position. Put everything back, started it up, absolutly NO POWER! It is obvious the timing is way off. I just tore every thing down again, Lined up all the marks again, made sure the #1 piston was at TDC with all the marks lined up and it is. Any input, any help, please! Thanks in advance, Paul