u13turbo
-
Posts
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by u13turbo
-
-
Its easy enough to do, If i remember correctly you dont even have to move injector lines, Just undo all the bolts, take the intake pipe off that comes over the rocker cover off, and pull its out.
-
Awhile ago i chucked some 2" springs in, and reindexed torsions, the anchor for torsions was sitting low and one got bent abit, so today i reindexed again, aswel as bending the bent one straight, up into the crossmember, But now the front sits really low, i tried the next spline up and that made it sit to high... There is a little bit more room for cranking up so im hoping it will make enough difference.
When i done the lift, i didnt worry about shocks. Currently i have one standard one and one aftermarket one, done by previous owner....... I can see that the side with the newer shock, sits quite abit higher, so im guessing my old standard one is shot? Im on a tight budget atm, still studying, so were would i get some ok shocks for a good price? in New Zealand.
Cheers
-
My auto is near farked, When i let off throttle at 100, revs drop, then i apply throttle and it just slips for abit until it hooks O.D gear again....
-
If you want to go big, SAS is the only way to go.
I'd love to. Bit more difficult to do it in New zealand.
-
Mines 4.8 ratio too.
Oh really? to find out is it on the chassis plate thing or somewere on the diff?
-
dam!! im pulling 2800-3000 rpm at 100kmh on 31s!! are yours all autos? i have the manual box
Yep we both autos. And you must definitly have the 4.8 ratio diffs?
-
I'm surprised he hasn't broken anything. 35's are way too big and like to break stuff in our weak IFS systems.
From what I've heard that happens with 33's..
-
The light for the boost gauge is wired to your park lighting circuit, you will have to do some hunting there to find a suitable feed for it.
It would be better to go 3" right to the airbox if you can, I used a reducer from my 3" snorkle pipe to the airbox as it was easier. I have some spare flexi hose for the std airbox end if you need it.
Cheers for that Pete, I think i will give it ago to go 3" the whole way. As for the park lights, should i be looking around the steering column for a feed? just use a voltmeter to find some voltage when park lights are turned on?
-
Hey guys, got a boost gauge in and connected, just don't know where to wire the light in for it?
Also, my new snorkel is 3", should i take the filter box out and chop the old 2" one off and weld on a 3" bit?
-
Yeah its nothing to do with key in the ignition because the locking use to work and the key has always been stuck. I checked for voltages today, and on the drivers door im getting voltage change as i press the unlock/lock button(around 10.7V) all the way down to the little rubber sealed thingy, so im wondering if the fault is in there?
-
I cannot help you much with the electrics except suggest you start fault finding, start from the door lock itself.
As for the stuck key? Dunno, maybe a visit to a locksmith?
The boot will manually lock with a key.
Cheers Pete, yeah i wll have to start fault finding, thought i would just check first to make sure there isnt a common fault point. And yeah, the key hasnt bothered me much, except it would be an easy steal for someone
-
Hey guys, my central locking packed a sad, it was locking and not unlocking, now it wont do either...... Kinda bad as even if i manually lock doors, the boot is still unlocked. And whats worse is a key is stuck in the ignition(If anyone knows how to fix this it would be a great help too).
Cheers
-
1700RPM at 50km/h and 2200RPM at 100km/h
That's an auto on 33" tyres
Hmm.. im pulling 2500rpm at 100km/h on 31's.. I really want to get 33's but abit outta budget atm
-
hi
i get 11 to 100km
with a full tank 650 to 700km
Yeah so there definitly something up with mine.... How many RPM are you pulling at 100km/h?
-
Must have a catch-up and compare notes sometime.
Sounds like a good idea to me
-
It is not too bad and I bet it is time for new coolant anyway...
Remove fan shroud (6 screws) and fan (4 nuts). The fan is not required but it does give you more working room. Drain coolant and dispose of properly. Undo the coolant hoses, upper and lower. Remove 2 bolts from top holding the radiator to the two brackets on the front support. Tilt back and lift out. Fire up the pressure washed and gently blow that crap on out. If you have AC and/or AT oil cooler you might want to pull the grill and pressure wash those too. I am 5-spd but I do the AC without removing... Then I use the opportunity to wash the remainder of the garage floor
Sorry mate was talking about the little radiator in the box by the fan resistor for heater.
-
Same as mine, and it is intercooled too. I do not worry too much though as it leans out on highway trips. Maybe there is something amiss with it. but it gets me there n back.
BLACK SMOKE IS THE EXCESS POWER BEING RELEASED
Yeah it does its job, just abit hard to afford it being a student, + road users its a heck of alot more to run than my turbo sr20det bluebird....
-
Pictures please?
Ill get them tomorrow, Hopefully if i find time.
-
my terrano is using like 16l per 100 kms, I've heard is should be using 10-12l per 100kms, mine use to blow abit of black smoke, so i wound the fuel down, now it only blows black smoke if i pulse the throttle, and it only comes out when the rpms get back to idle. Anyone know what the problem could be?
I have checked the air intake, its clear, the exhaust is fine.
-
Tried cleaning my resistor, and i did find the problem, the radiator is clogged with greasy dust, fricken hard to get that @!*% out of the fins, i cleaned a small area but to do anymore i would need to remove the whole thing, and i dont know if that is easy or not?
-
It will mess with your alignment and on the trail it will gouge your frame.
Ok.. guess its a new one of them aswel then...... and i still have play in my steering setup somewhere, replaced draglink and left tie rod inner balljoint, but still got play..
-
I think my idler arm is slightly bent, hard to tell but the nipple on top of my drag link is leaving grease marks on the chassis on the side of the idler and on the steering box side it isnt, so im guessing it is, will that put the wheel alignment out?
-
Ok cheers mate, only issue with that is i live in New Zealand, and Ebay is a USA site, and since im 17 i cant sign up to it either...
-
Mine (1991) was attached to the truck with a bracket that screwed into some holes in the side of the radio and then into two holes above the radio. You might be able to get it at a wreckers, but since I think all the radios come with lots of holes in the sides, maybe you can get some standard bracket somewhere? Not sure.
Bugger it..... I usually hang on to unnecessary @!*%.. this time i chuck it away and i end up needing it...............
95 pathy click click but no start!
in 90-95 WD21 Pathfinders
Posted
Keep turning key, may take an hour of it, but if it eventually works, it'll be a burnt out part of the armichure, just buy a secondhand starter. Mine does the same thing, I still use it but 2 times in last 3months iv been stuck trying to start for over an hour..... and one of those times when it finally worked i had a flat battery... all in good fun.