PaMountianbiker
-
Posts
1,349 -
Joined
-
Last visited
-
Days Won
7
Content Type
Profiles
Forums
Calendar
Posts posted by PaMountianbiker
-
-
I tried to get the pics the same I just don't have any that are exact. I could definatley tell the difference. front seems more even now about 1 inch lower in front vs rear.
-
I'll see how my 33x12.50x15's fit then I will decide.
-
Change that user name to Boomerang!!
B
HaHaHa!!!!
-
It reminds me of my old pathy except mine was maroon
-
Thanks I'm still not sure whether I need it or not
-
Sounds like a cool idea (for summer/fall)
-
Bought it some 33's
-
Congrats OSR !!!! Love that pathy
-
So do you think maybe the spacer blocks for the SFD should be welded in place while installing ? I'm really thinking long and hard whether I should get a SFD because of my style of wheeling. Rough and hard with alot of rock gardens.
-
before
after
-
I just wanted it to sit more level. Seemed to have too much rake after the spring lift. I really thinking about sfd now though.
-
I have 2" ac coils and nx4 spacer for another inch .no rubbing.even in extreme wheeling .. LOL
-
I just picked up some 33's BFG mud terrain;for mine. I have 32's now. Just wanted 33's now all I have to do is get them on there so I know where to cut.. LOL!!!!!!!
-
I love this website
Thank you Npora members -
well I just fixed my Rock crawler
LOL. Cv joint went fine. the tie rod gave me a little trouble:couldn't get the nut off the steering rack. I discovered that my whole diff is loose seems it mounts with two bushings(one on each side) and I have none.Anyone else have an issue like this? -
mine looks like this
-
thicker rods would be nice anyone consider sleeving them ? I might try to sleeve mine but is bending one better than breaking the rack or how it mounts? I will always carry a spare now.
-
after my weekend I need full skids .also interested in the trailing arms
-
-
Thank you again!
I will be ordering them and my cv joint tomorrow 
-
Thank you
-
-
Anyone know how to take apart the tie rod from the steering rack does it thread in or not? I really bent mine today and broke a cv joint and bent a trailing arm in the rear I will take pics tomorrow just thought I would ask??
-
The spacers are made with the 1/2" holes.....
I guess when I eventually install a SFD....I would use a new strut mount, drill out the stock bolts and weld shorter 1/2" bolts.....oh well!
Do it don't be scared
I love your truck with that bumper! 
front diff loose?
in 96-2004 R50 Pathfinders
Posted
Bought my parts to fix this today at my local nissan dealer $140 for both sides doesn't look that hard to change them.