Illusionist

so... i didn't get even an offer to keep my truck, but i just got home from looting some goods! I couldn't remember all that everyone had asked for but i did get the dimmer switch, hazard switch and defrost switch. i also got some other small things, can't remember what all else. If interested leave a comment and i'll let you know if i got it.

ok thanks.

if my insurance company totals my car, i don't get to keep it do i? Because when i totaled my @!*%vic they would hardly even let me get my stuff out of it.

i don't have uninsured motorist coverage but i was not at fault in the accident so the lady is taking al the fault and my insurance company is suing her for the damage. I'm kind of hoping it is totaled because i only paid 2k for it and i should get back what it's worth probably around 3 to 4k! i guess my '95 didn't have airbags, so yeah! But i was also surprised at how little my pathy was damaged compared to her car! I called today about the police report and it still wasn't ready, so i'm going to go down there tomorrow and figure out what's going on with it.

Yeah i'm fine, i wasn't hurt at all... Had my air bags deployed i probably would have been banged up a little.

yeah it's been a rough week! I'm hoping they will total my car and give me around $5,000 back. i saw a 94 pathy in the paper listed with a lift, winch, air lockers, etc. for 4k

So i was on my way home from school and this lady pulls right out in front of me and practically stops in the middle of the road. I slam my breaks hard but get her right between the tires driving her passenger side in 18 inches. She wasn't wearing her seat belt and had supposedly serious injuries, but none visible that i could tell. They took her away on a stretcher and she also had no insurance. This was a week ago and the police have yet to complete an accident report so i'm stuck without a car, which sucks. Check out the pictures

ok, so i went to my local NAPA and got some replacement vacuum hoses. I took the others that were dried out and cracked and they handed me replacements at no charge. So i slipped them on and haven't had any problems so far. thanks again for all the help.

thanks, i noticed a few others around there that weren't as bad, but had small cracks in them like they had dried out and rotted or something. Hopefully i'll get to replacing those tomorrow or this weekend. Thanks guys.

yes that hose has been it looks like melted all the way through and isn't connected at all. But would that be what has been causing the EGR Function code?

ok, do i'm not exactly sure what the EGR valve is, or anything so I just went looking around and found a little rubber hose, melted in half it looks like. i'm guessing this is what may be causing my problems? thanks

ok, i finally got around to checking my codes, and the only one returned was 32, EGR Function. Not really sure what that means, but i've looked around and most people just say to check the hoses, but i'm not exactly sure what hoses to check and what to check for. Anyone else know what could be causing this?

i've been real busy lately and haven't had time to check my ecu. hopefully i'll be able to get out there and check it sometime today or tomorrow.

alright i'll do it sometime tomorrow morning and post my results thanks

my check engine light periodically comes on for about 5 minutes then goes off. it happens maybe once or week or so and i was thinking about checking the ecu codes, but if the light doesn't stay on, will the ecu still hold the codes if something is wrong?

did any of you actually read what i said? i have no problems getting the door panels off, i've done it several times, and that wasn't the question. I asked about getting to and replacing the window regulator.... not the door panel.

I'm getting a new regulator as my window hasn't worked since i bought my truck about a year ago. I was wondering if anyone has replaced their's before and how difficult it was and if anyone had any tips on doing this. i know how to get the PITA door panel off so i'm just looking for advice for getting to and replacing the regulator. thanks

i saw that commercial about 5 times last night, and it made me realize how lazy people are becomming....

yeah i remember watching a video, can't remember where, but it was a interview with like a tea of lock pickers and explained, in very good detail how bump keys work and how to do it. pretty cool, even thought about getting some myself, but then thought twice about it! lol i'll look for a link and post it if anyone's interested

from the TSB post by madkiwi in the old tech section, so yes that would include your 1990 pathy

cool, i've been meaning to do this since i read the post about the TSB but just haven't had time. hopefully i'll get to do it soon, and maybe my tranny will last long enough for me to save up and get it rebuilt before it dies :sniff:

that's how it's supposed to work.

would driving the passenger side up onto a ramp or something else be just as good?

i've got some family that lives up in that area. not real familiar with it up there, but are there any good trails around?

seen a few posts about people in Chattanooga, TN. just checking up and seeing who all is from Chattanooga and surrounding areas. I think it'd be cool if we all got together, if you don't already, and go wheelin and collectively work on our pathfinders i've been here in chattanooga all 18 years of my life, and will probably always be here, So i guess i'll see you here and the streets.