Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

drobinso

Members
 View Profile  See their activity

  • Posts

    4

  • Joined

  • Last visited

 Content Type 

Everything posted by drobinso

  1. drobinso
    Anyone have any information on this kind of problem? I am replaceing my engine and installing the oil pan. Ran into a problem .... when installing the pan with new gasket it doesn't look like the rear of the pan is compressing the gasket. The space in-between the rear main seal housing (gasket) and oil pan is about 1/8 inch. My second problem is the gasket is being pushed out the side of the pan to easily. Hardley tightening the bolts at all. Maybe I should of installed it dry. FYI - It did not have a gasket before. Only gasket was over the bearing end caps. Danny
  2. drobinso
    Found an engine from C&S Motors in So Cal. A low mileage used from Japan. I am calling them tomorrow to see where that leads me. Anyone heard or purchased from them before? Thanks SC88Pathy I feel a little more comfortable Getting one of these Japan motors. I need to get this put together in the next few weeks. My daughter needs a car and old dad is here to help. She is the one that bought the Pathy originally. Thanks slick for the info and parts connection (http://www.partsdinosaur.com/index.html). Here is the engine prior to the pull. Danny
  3. drobinso
    prunepicker from northern calif. By antioch, stocton in Brentwood
  4. drobinso
    My 93 pathy v6 hydro locked. My son took it swimming. It ran good prior to swimming lessons. Info: 130,000 on the engine. Removed engine and the piston rods were bent. After removing rods the crank turned smoothly. Rust on the piston walls and cam lobes. I am looking to buy an engine from RPM or ebay. Big price difference on EBAY. Has anyone purchased from RPM? Used engines with low mileage from Japan (are they for real)? The engines from EBAY seem to come from JBM. Has anyone purchased from them? Any suggestions or comments. Help Thanks Danny
×
×
  • Create New...