Jump to content

MaritimeMan

Members
  • Posts

    1,063
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by MaritimeMan

  1. Sounds like a decent idea. One thing though. Location, location, location. This could really fly if you were to locate it near a major city or in a suburb. A bit further out, and you might not have people will to travel and pay, when thier buddy has a garage they will let them use. Just my $0.02

  2. Here's the problem I ran into. Check the crank shaft diameter. Make sure it is the same as the one you have. When I did my '91 VG30E, I didn't realize it was a different size till I had everything mounted but the pulleys. Measure yours, and inquire about the size of the one you are lookin at.

     

    M.M.

     

    Edit: as for the knock sensor, the new motor I put in didn't have the same mounting place as the old one, so I drilled a hole as close to the crankcase in the bell housing (where the tranny connects) as I could, then just bolted it there. It has been workin fine for the last 2 years. (knock on wood) B)

  3. Your lucky day. I was just at the local pick-n-pull today and found and 89 Pathfinder mostly stripped. The one good thing I pulled off it was the support struts for the rear hatch (not the rear window) for 20 bucks. I'll translate that directly over to you plus shipping if you want, no additional cost. I recently replaced mine, but though an extra set might be a good thing to have. Let me know if you are interested. I am located in the bay area (Vallejo) and they weigh maybe a few pounds.

     

    M.M.

×
×
  • Create New...