MudSlinger

well i fixed the problem, no thanks to the guy who owned it before me. for some ungodly reason, he took the bleeder line out and just put a straight hose on it. i replaced the bleeder, bled the lines, and she is running fine. thanks for the help guys.

I live in upstate NY, and its pretty cold here, so every morning, i go out and start my pathy about ten minutes before i leave. the other day, i went back out to find her pretty hot. i opened the hood and found the lower radiator hose leaking. OK, no problem, so i fixed that, but it still overheats. I think it might be airlocked, but i don't know where the bleeder is, but it might also be the thermostat. Anyone else had this problem? BTW, my pathy is an 87' SE V-6. Thanks a bunch in advance.

they are 31X10R15's. i'm not sure what brand, i could have told you yesterday, but i have forgotten now. when i was at the shop, i stood them up next to 2 different 31's, and they were way bigger both times. if they do rub, i'll crank the t-bars up till i get the lift.

i don't have my lift yet, but my dad just baught me some really big 31's. they measure to 32's. will they fit my stock pathy? i am planning the lift for soon, but i don't know when i will get to it, but i have the tires now??? help please...

i'm afraid that, because i'm only mounting 31's, that if i put a 3" lift on her, she will look funny, and have too much space between the tire and the wheel well......what do you guys think?

thank you very much guys, for all your help. i have decided to go with 31's. 10" wide on 10" wide rims with 3.5" backspacing, and i think a 2" body lift. anyone see any problems with this?

if the second number of a tire size is its width, and the second number of a rim size is its width, how do 11.5" wide tire go on 8" wide rims. i am obviously not getting something, lol.

is 3.5" backspacing too little? it seems pretty small to me?

15x10" 6 on 5.5" w/3.5" backspacing rims..... will work with a 32X10X15 tire???? thats the closest to 4" that 4wheelparts.com sells in 6 lug. is that the right lug pattern, 6 on 5.5?

here it is quick and easy. i am going to put a 3" body lift on my 87' pathy. i want to put the biggest, widest, stick-out-the-furthest-without-me-dieing tires i can on it. i'm going to buy 15" RC rims. after that, i am at a loss, someone please be kind enuff to lay it out for me, i just spent about an hour and a half searching, and got no where. after i figure this out, no more dumb questions, i promise. this is what i need- 1. rim size i should buy, i know 15's, but after that... 2. 32X??????X15...and why is it so hard to find 32's? 3. backspacing.....??? i think thats it...thanks a lot guys

thats the part i did get, though it really doesn't make sense, still. but what is the difference. the way i see it, i don't really have a choice, unless i see it wrong, which is, i think, the case...

to be completely honest, i'm not too sure what backspacing really even is, or what the difference is between neutral backspacing or anything else. i searched, and only found 2 threads dealing with backspacing, this was one, and the other didn't help at all. thanks...

10 or 10.5

thanks so much for your patience guys, i have just ONE more question. an 87" with a 3 inch body lift, and 32 X 10 or 10.5's........what kinda backspacing should i be looking at?

so, if i were to just body lift it 3", i could fit 32's no problem???? also, is there any point in the dual-shock kits i've seen? and what kind of shocks could i get for relatively cheap, i was thinking about ranchos, how are they?