After being part of R50 pathfinder family for so many years, Sfcreation is now looking to enter the R51 Pathfinder one. We will soon bring to market our 1", 1.5" front spacers and our 1",2",3" rear spacers. Now since the R51 pathfinder is IFS and IRS, of course the real height of the lift will be greater than the height of the spacers. This is where you come into play !
2 options are available:
1) If you have a pathfinder R51 and you live near my location (Ste-Catherine, QC), and willing to drive to it, You'll get the lift kit, and I'll install it with you! Reserve yourself a full day ! Measurements will also be taken for a full set of skidplates.
2) If you are good with tools and are not afraid to use them, I'll send you all the items of the lift kits. You will need to install them, send the pictures and you keep it all.
All the spacers have been made using suspension items from an R51 (struts, coils), but now we need pictures and real life data about the height in order
to finalize the new product introduction.
If you are interessted, please contact me at (info @ sfcreation . com) and send me some pictures of your R51. I am looking for clean and very little
(if any) rusted R51. This pathfinder will be immortalized on our web site, facebook page, etc.. so it needs to look good !
Je parle francais aussi.. donc aucun probleme avec ça !
Steve.