Jump to content

Having a hard time deciphering ECU codes (Video)


xylicon
 Share

Recommended Posts

My 94 Pathfinder started running rough on the way home yesterday, the tachometer rendered itself useless and began bouncing all over the place and the engine started to run rough at low RPM.

I was able to get it into my garage and pulled what I think are codes 23, 45, & 12. After pulling the codes I started the engine and it idled smoothly which leads me to believe it may be a loose connection of some sort.

 

The reason I ask is that I do not see a code 23 in my Nissan repair manual.

 

Video:

 

Link to comment
Share on other sites

23 = idle switch

45 = injector leak

12 = MAF

 

Check the connector on the top of your MAF. Mine was bad and the stupid thing would make the truck run rough when the hood 'wiggles' and the cable was touching it. Open your hood, start the truck and let it idle (hopefully it runs fine at this point), then grab the wire running to the top of the MAF and give it a bit of movement. If it changes the behavior of the engine, you have a bad connection. I had a broken wire and had to rebuild the connector (at a 90 degree so it didn't hit the hood). Might just need the pins cleaned for a better connection.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...