Bob Posted November 20, 2005 Share Posted November 20, 2005 I just had new tires put on my pathy the other day (235/75-15 Dayton Timberland AT's). They have been rubbing everyonce and a while. They only rub when im backing up and turning. Never really when im going forward. Could this be caused by saging front torson bars? Should I try cranking them up alittle to see if that fixes my problem? Thanks Bob Link to comment Share on other sites More sharing options...
Bob Posted November 20, 2005 Author Share Posted November 20, 2005 I was out looking at it looks like it is rubbing on the fender flare. Link to comment Share on other sites More sharing options...
Precise1 Posted November 20, 2005 Share Posted November 20, 2005 I'm assuming you have the stock rims, so back spacing should not be part of the issue. Yes, 235/75/15 should fit easily with no rubbing issues on a stock truck. Odds are that the T-bars have sagged, so yes, try tightening the sdjusters a bit; that should cure it. Remember to turn them both the same amount. Since it is so easy to adjust, I recommend just 1/2 turn at a time and testing inbetween. It shouldn't take more than 1-2 turns. Hopefully the front end wont be higher than the rear then... Let us know how it went. Thanks. B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now