Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Interior lights: Dash/all controls/parking lights


Guest PointGiven 2000
 Share

Recommended Posts

Guest PointGiven 2000

All interior lights and parking lights are out.

I read previous forums and all fuses are fine (checked in the central fuse box and have bloody knuckles to prove it)

Someone mentioned something regarding a switch near or on the steering column.

How do i pinpoint this switch location before heading to a junkyard for replacement ?

 

tanks much

Link to comment
Share on other sites

Guest PointGiven 2000

I replaced the 10A fuse for the intererior lights. No help.

Probably forgot to state that i own a 93 XE manual.

My fuse box cover dosent list any fuse for the parking lights.

 

any other ideas ?????? :confused:

Link to comment
Share on other sites

Guest gennocide

make sure there is nothing shorting out on the firewall i had this happen to me about three weeks ago. a wire was woren out on the firewall. this popped the fuse

though.

Link to comment
Share on other sites

Check all you fusable links (I think there's five or so) for a short or corrosion or something. My guages, interior fan, headlights, just about everything flaked out on me for a few days because of a fusable link damaged inside the connector.

Link to comment
Share on other sites

Guest PointGiven 2000

Thanks for the feedback and i finally found the problem.

I removed the steering column shrouds. then removed the switch housing for the turn indicator/lights/cruise etc etc.

There are five copper fingers inside that make contact when the parking lights, low beams and high beams are switched on. The middle copper finger (longest one) for parking lights looked like it was making contact when switched on. I gently bent it down so it would make better contact when switched. and wallah !!

 

it worked !!!!!!! Outstanding !!!!! hope this helps other owners !

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...