NastyPathy Posted July 10, 2005 Share Posted July 10, 2005 Has anyone got factory switches to install in the center console and the dash panel for lights and other accereries? The ones that fit in the little cutouts... If u did how much did u pay for each? Thanks Link to comment Share on other sites More sharing options...
Trialsin26 Posted July 10, 2005 Share Posted July 10, 2005 I was wondering the same thing. I want to install some additional lights but keep the interior stock with stock switchs. I have look on the web but no luck yet. Link to comment Share on other sites More sharing options...
02silverpathy Posted July 10, 2005 Share Posted July 10, 2005 I got a great web-site to try...car-part.com, and a phone number to another place East Coast Auto....800 231 9121 these guys combined seem to have about everything!!! Link to comment Share on other sites More sharing options...
CanadianPathyNut Posted July 10, 2005 Share Posted July 10, 2005 I have 3 different light switches hidden in my truck, I have a back-up light switch on the left of the steering wheel, there is an empty black piece of plastic shaped like the rest of the pieces, i cust a hole in it and ran a swtich through that, I have one mounted flush in that little area to the left of the automatic shifter, and one mounted on the overhead console where the temp. and directions is, Link to comment Share on other sites More sharing options...
NastyPathy Posted July 10, 2005 Author Share Posted July 10, 2005 4x4parts has the switches but there 15$ a switch just wondering if anyone found any that are better and cheaper. I dont like the look of switches they give u with foglights and stuff i want everything lookin stock. Link to comment Share on other sites More sharing options...
Guest blitZ Posted July 11, 2005 Share Posted July 11, 2005 (edited) If you are refering to the rectangular spots in the dash, you might try some marine switches. They are about the same size and come in various configurations. Some of them light up when on. If I get a chance I'll try one from my boat to see if it fits. Marine switches The width is just right, however you will need to shave about 1/16th of an inch off the height of the opening. Edited July 12, 2005 by blitZ Link to comment Share on other sites More sharing options...
NastyPathy Posted July 12, 2005 Author Share Posted July 12, 2005 thanks that will be a great help Link to comment Share on other sites More sharing options...
Trialsin26 Posted July 12, 2005 Share Posted July 12, 2005 (edited) I'm going to add some rear back up lights this weekend I hope, and eventually followed by some side lights and front top lights. I'll post a pick of the switch I decide to use. Edited July 12, 2005 by Trialsin26 Link to comment Share on other sites More sharing options...
NastyPathy Posted July 13, 2005 Author Share Posted July 13, 2005 ok cool thanks Link to comment Share on other sites More sharing options...
Trialsin26 Posted July 20, 2005 Share Posted July 20, 2005 (edited) Nastypathy - i got the lights mount but I'm still working on the wiring. If it ever stops raining I'll get it done. Here is the switch I'm going to use and I'll mount it in one of the spare plates. I think it will look the cleanest...Pilot Switch Edited July 20, 2005 by Trialsin26 Link to comment Share on other sites More sharing options...
NastyPathy Posted July 20, 2005 Author Share Posted July 20, 2005 Hey let me know if they fit perfectly... Thanks man nice find Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now